News
Enterprises specializing in the production of polyurethane hoses and hose assemblies
The appropriate end connection: because of low cost, convenient connection nut and is widely used, but the vibration is large , should give full consideration to the nut loose topic, this time can be taken Portland connection. If the impact pressure of the system is higher than the working pressure of the high pressure hose , it will not only reduce the service life of the high pressure hose, but also lead to the accident of personal equipment.
22
2019
/
01
The interference of the life of the ultra-high pressure hose
When selecting and using the super high pressure hose, according to the working pressure of the high pressure cleaning machine, select the appropriate pressure level of the hose. When the actual pressure exceeds 1.25 times the specified pressure, the working life of the hose will be reduced by 50%.
22
2018
/
03
Why does the high-pressure hose split
1platformtoimplementorothertransportationpositionafterhigh-speeddrivingonunevenroadsurface,suspendedbodyroughtoloadafewtimeslargerthantheoriginalshockpressurehose,thesafetyvalveinaninstantanddifficult
22
2018
/
03
When you pay attention to the purchase of ultra-high pressure hose, what do you know
In the selection of hoses, should be selected according to the specific application of the appropriate hose, connectors and hose assembly. The factors considered are the type of hose, the size of the hose, the length of the hose, the working pressure of the system , the fluid of the system and the environment of use.
22
2018
/
03
Precautions for use of ultra high pressure hoses and safety measures for use
Pressure hose designated working pressure is usually not less than the maximum pressure of the system, not only in constant use, to progress in 20%; for frequent use, often to reduce bending 40%. High pressure hose, high pressure hose, high pressure oil pipe
22
2018
/
03
Damage and maintenance of high pressure hose
The inner and outer layers of the pipe wall of the high pressure rubber hose are oil resistant rubber, and the middle part is a (2 to 4 layers) cross braided steel wire or a winding steel wire. The poor quality of the hose will appear: tube wall is uneven; wire braid too tight, too loose or too little pressure hose wire layers
22
2018
/
03
Copyright©NINGJIN COUNTY HONGXIANG POLYURETHANE PRODUCTS CO. ,LTD
