News
Enterprises specializing in the production of polyurethane hoses and hose assemblies
22
2018
-
03
When you pay attention to the purchase of ultra-high pressure hose, what do you know
Classification:
Company News
In the selection of hoses, should be selected according to the specific application of the appropriate hose, connectors and hose assembly.
The factors considered are the type of hose, the size of the hose, the length of the hose, the working pressure of the system , the fluid of the system and the environment of use.
Joint crimping hose hose assembly has a variety of different types of hose should be based on different joints .
Note: hose needs to be stripped off and no need to peel off two types of rubber. The joint is not the same , peeling rubber type joint sleeve groove should not be too sharp, otherwise it will damage the hose reinforced layer . The right to withhold joints , hose assembly safety and normal work is critical .
Many types of joints , to choose the appropriate connector, socket design to standard, reasonable . Sharp grooves, non-standard size will be broken wire reinforcement layer. Joint crimping, should be based on the inside and outside diameter of the hose to determine the withholding amount .
Key words:
Related news
What are the conditions of high pressure tubing storage
2020-07-30
High pressure tubing storage, should be placed according to the different specifications, do not mix, and the signs to access. Ultra high pressure hose, high pressure hose, high-pressure pipe, high pressure oil pipe cooling tube storage warehouse, should be kept clean and ventilated, the relative temperature is below 80%, the warehouse temperature should be maintained at between 15~+40 ~ C, and avoid the hose from direct sunlight and rain leaching. High pressure hose, high pressure hose, high pressure oil pipe
2020-04-22
The appropriate end connection: because of low cost, convenient connection nut and is widely used, but the vibration is large, should give full consideration to the nut loose topic, this time can be taken Portland connection. If the impact pressure of the system is higher than the working pressure of the high pressure hose, it will not only reduce the service life of the high pressure hose, but also lead to the accident of personal equipment.
Application of high pressure oil pipe in hydraulic transmission
2018-03-22
Hydraulic transmission in the lathe, drilling machine, chain wheel bed, grinder, cutting machine, milling machine, planer, widely used l machines and shaking broaching machine, CNC machine tools and other machine tools.
Cleaning method and storage method for high pressure oil pipe
2018-03-22
As a kind of high pressure oil rubber tube high pressure oil supply important, in order to achieve better results, we should do a good job of cleaning work when in use, let us look at the relevant details of the cleaning method
Copyright©NINGJIN COUNTY HONGXIANG POLYURETHANE PRODUCTS CO. ,LTD
