News
Enterprises specializing in the production of polyurethane hoses and hose assemblies
Precautions for use of ultra high pressure hoses and safety measures for use
Pressure hose designated working pressure is usually not less than the maximum pressure of the system, not only in constant use, to progress in 20%; for frequent use, often to reduce bending 40%. High pressure hose, high pressure hose, high pressure oil pipe
22
2018
/
03
Damage and maintenance of high pressure hose
The inner and outer layers of the pipe wall of the high pressure rubber hose are oil resistant rubber, and the middle part is a (2 to 4 layers) cross braided steel wire or a winding steel wire. The poor quality of the hose will appear: tube wall is uneven; wire braid too tight, too loose or too little pressure hose wire layers
22
2018
/
03
Cold tube manufacturers tell you what are the characteristics of ultra-high pressure hose
Ultra high pressure hose is a German production of SPIR STAR hose. The hose layer is through the special treatment of high strength steel wire winding layer, inner layer is Polyoxymethylene (POM) or polyamide (PA), the corresponding outer layer is polyamide (PA) or poly ester (Yaan PUR).
22
2018
/
03
